Easy methods to Build a Shelf Using Brackets

Sharing is caring!

Brackets are available in a myriad of shapes and sizes. Utilizing brackets to support and create a shelf permits the shelf to be coordinated with the room decor, be customized-sized, and be constructed by an intermediately skilled home decor DIY-er. A number of shelves, staggered on a wall, make a severe design statement. A shelf placed above a door is a discovered-area storage answer, and a collection of shelves running round a room’s perimeter, high on a wall, can make a lateral book case for a small library.

Step 1

Select brackets that can accommodate the chosen shelf. A typical shelf is 12 inches deep. This is the measurement from the entrance of the shelf to the wall. Brackets are basically “L” -formed; one leg of the L is attached to the wall, the other leg, which protrudes from the wall at a 90-degree angle, supports the shelf. The length of the protruding leg must be at the least -thirds of the depth of the shelf. For example, if the desired shelf is 12 inches deep, the supporting legs of the bracket should be at the very least eight inches. Usually, both legs of the brackets are the identical length; but this will not be a hard rule.

Step 2

Select the number of brackets to make use of for the shelf. If the brackets are spaced too far apart, the shelf will sag. A great rule of thumb is to put a bracket each sixteen inches. Place one at every finish of the shelf, 1 inch from the outside edge, and every sixteen inches alongside the shelf length.

Step 3

Mark the wall, with the self-erasing marker, on the place of the underside of the shelf. Measure the space from the floor to this mark. The 90-degree angle of the bracket will be aligned with this mark. The shelf will sit on the legs of the brackets that protrude from the wall at this mark. Mark the wall, measuring up from the ground, at 16-inch increments, one location marker for each bracket and one mark for every of the end brackets.

Step 4

Set up the brackets onto the wall on the indicated bracket places, following the manufacturer’s directions for attaching the brackets to the wall.

Step 5

Place the shelf, centered, on top of the brackets and insert screws up by means of the brackets into the underside of the shelf to secure it into position. It is useful to pre-drill the screw holes to stop a wood shelf from splitting.

If you have any kind of queries relating to exactly where in addition to how to work with Steel Shelf Brackets, it is possible to call us at the web page.

Tags